Shown are the roller guide used on the front doors to center the glass. I took
them apart to put new rubbers on them. The brackets were zinc plated and the
the brass pins and sleeves were cleaned and lube when assembled.

 

 

The pieces shown are the front door glass height adjusters. These control
how high or low the glass rises. When the convertible top is up the top
stops the glass but when the top is down these come into play and make
the glass align to the vent window and quarter window.

 

 

1     2     3     4     5     6     7     8     9     10     11   12   13   14   15   16   17   18   19   20  

21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40  

41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60  

61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80  

81   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100  

101   102   103   104   105   106   107   108